Cisco Meraki MS390-24P-HW network switch Managed L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) 1U White
Inteleca is not, and does not claim to be, an authorized Distributor/Reseller of this manufacturer's products.
L3, 24xRJ-45 Gbe, 32K MAC, 208 Gbit/s, 154.76 Mpps, 100-240V, 50/60Hz, 445x449x44mm, 7.4kg, White
Cisco Meraki MS390-24P-HW. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 24. MAC address table: 32000 entries, Switching capacity: 208 Gbit/s. Networking standards: IEEE 802.11ax,IEEE 802.1Q,IEEE 802.1ab,IEEE 802.1p,IEEE 802.1s,IEEE 802.3ad. Power over Ethernet (PoE). Rack mounting, Form factor: 1UOverview The Meraki MS390 addresses the most demanding enterprise applications by combining the simplicity of the Meraki dashboard with powerful switching hardware. To satisfy high-bandwidth applications and the deployment of high-speed 802.11ax/wifi-6 access points, the MS390 provides multigigabit ports, 480G stacking, and modular 10/40G uplinks. The MS390 delivers resiliency with fast stack convergence and StackPower. The MS390 provides Adaptive Policy using an overthe-wire tag which segments traffic into security groups to deliver scalable security. The MS390 is integrated under the Meraki dashboard to provide a simply powerful solution to the most demanding wired access applications. Adaptive Policy provides simple & scalable security policies to segment traffic using Security Groups. Security Groups are created in the dashboard using natural language such as “IOT device” & “Guest.” The security policy intent (e.g., Permit or Deny) is then simply provisioned between Security Groups which results in the segmentation of each group’s traffic. By making security policy management intuitive and scalable relative to legacy IP-address based Access Control Lists, Adaptive Policy empowers operators to confidently secure their network traffic independent of future network changes. By pooling & distributing power across MS390s using a series of StackPower cables, StackPower provides simple and resilient power distribution across the stack.
Cisco Meraki MS390-24P-HW. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 24. MAC address table: 32000 entries, Switching capacity: 208 Gbit/s. Networking standards: IEEE 802.11ax,IEEE 802.1Q,IEEE 802.1ab,IEEE 802.1p,IEEE 802.1s,IEEE 802.3ad. Power over Ethernet (PoE). Rack mounting, Form factor: 1UOverview The Meraki MS390 addresses the most demanding enterprise applications by combining the simplicity of the Meraki dashboard with powerful switching hardware. To satisfy high-bandwidth applications and the deployment of high-speed 802.11ax/wifi-6 access points, the MS390 provides multigigabit ports, 480G stacking, and modular 10/40G uplinks. The MS390 delivers resiliency with fast stack convergence and StackPower. The MS390 provides Adaptive Policy using an overthe-wire tag which segments traffic into security groups to deliver scalable security. The MS390 is integrated under the Meraki dashboard to provide a simply powerful solution to the most demanding wired access applications. Adaptive Policy provides simple & scalable security policies to segment traffic using Security Groups. Security Groups are created in the dashboard using natural language such as “IOT device” & “Guest.” The security policy intent (e.g., Permit or Deny) is then simply provisioned between Security Groups which results in the segmentation of each group’s traffic. By making security policy management intuitive and scalable relative to legacy IP-address based Access Control Lists, Adaptive Policy empowers operators to confidently secure their network traffic independent of future network changes. By pooling & distributing power across MS390s using a series of StackPower cables, StackPower provides simple and resilient power distribution across the stack.
| Management features | |
|---|---|
| System event log | Y |
| Quality of Service (QoS) support | Y |
| Switch layer | L3 |
| Switch type | Managed |
| Ports & interfaces | |
|---|---|
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 24 |
| Network | |
|---|---|
| Number of VLANs | 4094 |
| VLAN support | Y |
| Flow control support | Y |
| Link aggregation | Y |
| Broadcast storm control | Y |
| Spanning tree protocol | Y |
| Auto-negotiation | Y |
| IP routing | Y |
| Port mirroring | Y |
| Networking standards | IEEE 802.11ax,IEEE 802.1Q,IEEE 802.1ab,IEEE 802.1p,IEEE 802.1s,IEEE 802.3ad |
| Data transmission | |
|---|---|
| Jumbo frames support | Y |
| Static route | Y |
| Forwarding rate | 154.76 Mpps |
| Switching capacity | 208 Gbit/s |
| MAC address table | 32000 entries |
| Security | |
|---|---|
| Authentication type | RADIUS |
| BPDU filtering/protection | Y |
| Security algorithms | 802.1x RADIUS,SNMP |
| Loop protection | Y |
| IGMP snooping | Y |
| Access Control List (ACL) | Y |
| DHCP features | DHCP relay,DHCP server,DHCP snooping |
| Multicast features | |
|---|---|
| Multicast support | Y |
| Protocols | |
|---|---|
| IPv4 & IPv6 features | IPv4/IPv6 access-control list (ACL) |
| Routing protocols | VRRP |
| Design | |
|---|---|
| Certification | FCC Part 15 (CFR 47) Class A, ICES-003 Class A, CISPR22 Class A, CNS13438, EN 300 386 V1.6.1, EN 55022 Class A, EN, 61000-3-2, EN61000-3-3, KN 32, TCVN 7189 Class A, EN 55032 , CISPR 32 Class A, V-2/2015.04, V-3/2015.04, VCCI-CISPR 32 Class A, CISPR24, EN 300 386 V1.6.1, EN 55024, KN35, TCVN 7317, CAN/CSA-C22.2 No. 60950-1, UL 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950.1, RoHS |
| Number of fans | 3 fan(s) |
| Product colour | White |
| Form factor | 1U |
| Stackable | Y |
| Rack mounting | Y |
| General | |
|---|---|
| Product family | Meraki |
| Performance | |
|---|---|
| Mean time between failures (MTBF) | 299000 h |
| Physical stacking (units) | 8 |
| Power | |
|---|---|
| Power consumption (max) | 554.4 W |
| Power consumption (typical) | 84.1 W |
| AC input frequency | 50/60 Hz |
| AC input voltage | 100 - 240 V |
| Power supply included | Y |
| Power over Ethernet (PoE) | |
|---|---|
| Total Power over Ethernet (PoE) budget | 445 W |
| Power over Ethernet (PoE) type supported | PoE+ |
| Power over Ethernet (PoE) | Y |
| Operational conditions | |
|---|---|
| Operating relative humidity (H-H) | 5 - 90% |
| Operating temperature (T-T) | -5 - 45 °C |
| Weight & dimensions | |
|---|---|
| Weight | 7.4 kg |
| Height | 44 mm |
| Depth | 449 mm |
| Width | 445 mm |
| Packaging data | |
|---|---|
| Rack mount kit | Y |
| Quick start guide | Y |
