Cisco 15454E-TCC2 Timing, Communications, and Control v2 Card, I-Temp, SDH
Inteleca is not, and does not claim to be, an authorized Distributor/Reseller of this manufacturer's products.
The Cisco TCC2 and TCC2P cards provide a next-generation system processor for the Cisco ONS 15454 MSPP. The Cisco TCC2 and TCC2P cards perform system initialization, provisioning, alarm reporting, maintenance, diagnostics, IP address detection and resolution, SONET and SDH data communications channel (DCC) termination, system DC input-voltage monitoring, and system fault detection. The cards reside in slots 7 and 11 of the shelf assembly, providing 1:1 equipment protection.
The Cisco TCC2 and TCC2P cards incorporate a highly stable Stratum 3 internal timing reference to provide system timing based on input received from an external Building Integrated Timing Supply source or from an incoming SONET or SDH optical signal. Synchronous status messaging helps the system to select the best timing sources, and a holdover mode maintains timing accuracy in the event that preprovisioned synchronization references are not available.
Nonvolatile database storage for communication, provisioning, and system control is provided, allowing full database recovery and survivability with complete system power loss. In addition, short-term clock recovery is also supported, reducing the need to reset the calendar and time-of-day settings after a brownout or complete power outage.
The Cisco TCC2 and TCC2P cards have two built-in interface ports for accessing the system: an RJ-45 connector and an RS-232. The RJ-45 port provides 10BASE-T Ethernet connectivity to the system, providing local and remote access to the craft-management system, Cisco Transport Controller, through a common Web interface. This port can also be used for interconnection to customer operations support systems (OSSs) and network management systems (NMSs), providing integration to external element management systems (EMSs), NMSs, and OSSs.
The Cisco TCC2P card provides additional security enhancements, allowing users to configure the front-panel and rear or Front Mount Electrical Connection (FMEC) Ethernet interfaces as regenerators or provision them with individual IP and MAC addresses for segregated craft and DCC access. The RS-232 port provides a serial ASCII interface for local craft access using VT100 emulation so that Transaction Language 1 (TL1) commands may be directly entered over a Telnet session without the assistance of a browser.
The front panel of the Cisco TCC2 and TCC2P cards provide multicolored LEDs for a quick view of the status of the card activity, raised network alarms, shelf voltage input, LAN interface, and synchronization. Two front-panel buttons allow users to quiet an active external audible alarm (alarm-cutoff button) or test the working state of system LEDs. The Cisco TCC2 and TCC2P cards are supported beginning with the Cisco ONS 15454 MSPP Release 4.0.0 system software for both the SONET and SDH platforms. Deployed networks may consist of nodes equipped with either Cisco Timing, Communications, and Control Plus (TCC+) or Cisco TCC2 or TCC2P processor cards. Nodes operating with previous versions of TCC processor cards can be upgraded, in service, to the new Cisco TCC2 or TCC2P, allowing migration to post-Release 4.0 software loads and possible future features.
|Standard interfaces||Ethernet, SDH|
|Number of service slots||1|
|Certification||Telcordia Technologies NEBS GR-1089-CORE, Issue 3 Level IEC 60950-1/EN 60950-1, 1st Edition UL and cUL/CSA 60950-1 1st Edition (Level 3, Type 2 and Type 4)|
|Switching capacity (SDH)||2.048 Gbit/s|
|Power consumption (typical)||19.2 W|
|Width||0.72" (18.3 mm)|
|Depth||9" (228.6 mm)|
|Height||12.6" (321.3 mm)|
|Weight||32.8 oz (930 g)|
|Operating temperature (T-T)||-40 - 65 °C|
|Operating relative humidity (H-H)||5 - 95%|
- Orders placed before 4pm EST M-F will ship same day
- Estimated delivery window is calculated at checkout
- Worldwide shipping available
- Items can be returned for any reason within 30 days
- Contact us to obtain an RMA # (Return Merchandise Authorization) prior to returning equipment
- 10% Restocking fee applies in most cases
- View Full Terms & Conditions
- If you encounter any issues with your equipment, our technicians will try to guide you through a solution, as it may be due to configuration
- If unable to resolve the issue over the phone, Inteleca will provide a replacement, repair the equipment, or issue a full refund
- Warranty Period limited to 90 Days for Resellers
- View Full Terms & Conditions